3/4 PVC Clips

[Kev7274]

Anybody know where to get the clips that will fit 3/4 (19mm) PVC pipe?

 

[rstehle]

Assuming you mean mounting clip, here is one: https://www.amazon.com/EMT-RIGID-CO...&qid=1523223933&sr=8-2&keywords=3/4"+PVC+Clip

 

[DrNeutron]

If you are in a pinch, just cut some 1" PVC conduit (about 1/4 out and round edges). I used a bench vise to hold the small piece of conduit and then an electric saw to cut it on slow speed. They hold 3/4" conduit great...
I did this with my ray tree 4 years ago and still holding up great. I just drilled 2 holes in it and countersunk some screws when mounting.

 

[arw01]

I printed mine from a thingiverse posting. Had some printed tight some printed loose for my Halloween arch.

 

[Kev7274]

I printed mine from a thingiverse posting. Had some printed tight some printed loose for my Halloween arch.

If I only had a 3D printer.

 

[DrNeutron]

If I only had a 3D printer.

Don't say that or you'll be like me and end up with 3....
LOL

 

[didjareally]

If I only had a 3D printer.

If you need something printed hit me up here or email me Sales@alllayeredup3d.com