5V Box

M

munu

Member
I have a bunch of items that are powered by batteries. They are all 5V devices. Since I don't like batteries I built the box in the attachment. The connector above the power supply that has a cable attached is what comes out from the box. The connector standing on the PSU is what would connect to the cable coming out of the box. However, now I wonder if I mixed this up. Should I have reversed the connectors? It's some work to fix it but I rather do it now than after I have built all the additional cables that go to the props and replacing the battery compartment of the props with the appropriate connectors.
 

Attachments

  • 5V_1.jpg
    5V_1.jpg
    65.1 KB · Views: 32
It doesn't really matter so long as V+ goes where you want it.

That being said, I would have reversed the connectors. I like what looks like the female connector to be connected to power and the male side to the device.
 
@MikeKrebs thanks for the input. I started doubting what I am doing. I will redo the 12 connectors on my 5V PSU box.
 
You must log in or register to reply here.
Back
Top