I've noticed that I'm getting the odd flash on P9-17 and P9-18 on my BeagleBone Black. These look to be shared with I2C-1, but I don't use I2C-1 on my board. I don't remember having issues last year, and I'm using the same controller and install as last year.
I was running OS 5.0, last year with FPP 5.3, I just upgraded to 5.5 this year. Next I re imaged the card (and swapped BeagleBones) and have the same symptoms.
My ports have 500 and 180 pixels on them as it's for a portion of my megatree and star, and the issues seem to affect the end of the string the worst.
If I change the ports, the issue goes away.
I was running OS 5.0, last year with FPP 5.3, I just upgraded to 5.5 this year. Next I re imaged the card (and swapped BeagleBones) and have the same symptoms.
My ports have 500 and 180 pixels on them as it's for a portion of my megatree and star, and the issues seem to affect the end of the string the worst.
If I change the ports, the issue goes away.