First time programming prop, what do i need??

[fathead45]

ok i have 3 of rpm 4 port e131 boards. there ready to run but i cant figure out what i need to program the prop chip. i have the prop plug(thanks david) and i have the usb driver installed. i tried to download the basic stamp program with no luck. what am i missing?

thanks

 

[budude]

I use the Propeller Tool, load the hex and hit F11 to flash the eeprom with the code. Just make sure the PropTool is pointing to the correct com port.

 

[DynamoBen]

i tried to download the basic stamp program with no luck. what am i missing?

You aren't dealing with a basic stamp you are dealing with a Propeller. Besides budude's suggestion you could try Propellent.