Here's what my Ender 3 pro has been up to lately

[ctmal]

I needed to replace my "star bursts". They were made out of wood and I got quite a few good years out of them but now they're starting to fall apart.
You can see the effect at about 14 seconds in here: https://www.youtube.com/watch?v=dxuutogDfEw

So, attached are some pictures of what I came up with.

I also posted all the necessary files needed on Thangs if anyone is interested. https://thangs.com/designer/ctmaloney/3d-model/Ropelight star-322102







I'm not sure why each picture seemed to have rotated when I uploaded them but you get the idea.

 

[Randomaker]

Those are pretty cool, may need to make some for myself. Thanks for sharing the file!

 

[Braveit1]

Looks great! I have a clip i designed that uses zip ties in place of bolts to hold to the pipe. pretty easy change. Just fill in the hole for the bolts and add a slot. (also reinforce the end part by adding 2 cylinders.)
I think i posted it on thingiverse. Let me know if you need a link. I think its on my 100 pixel start thing but i use it with other props.