The Build Info
P10- 16x32
Rons Pixel panel controller 3 outputs
so I first built a 3x4 p10 matrix and got it running in my sequences. Im running each row off each output on the controller
SO here is the problem
I wanted bigger lol. I added more making a 4x5 display. when i use the test function on the controller they all work just fine.
I re did my set up in lor to accommodate the extra panels. but now when i run the sequence only the first 3 rows of 5 work. I can not get anything on the 4th row which is connected to the 3rd row on the 3rd output.
display set up
row 1 output 1 5 panels wide 160 pixels
row 2 output 2 5 panels wide 160 pixels
row 3 output 3 5 panels wide
row 4 output 3 5 panels wide
i not sure how to tell lor how to understand that row 3 has more pixels and how the set up should look. do the panels do anything to help determine location.
any help would be appreciated.
P10- 16x32
Rons Pixel panel controller 3 outputs
so I first built a 3x4 p10 matrix and got it running in my sequences. Im running each row off each output on the controller
SO here is the problem
I wanted bigger lol. I added more making a 4x5 display. when i use the test function on the controller they all work just fine.
I re did my set up in lor to accommodate the extra panels. but now when i run the sequence only the first 3 rows of 5 work. I can not get anything on the 4th row which is connected to the 3rd row on the 3rd output.
display set up
row 1 output 1 5 panels wide 160 pixels
row 2 output 2 5 panels wide 160 pixels
row 3 output 3 5 panels wide
row 4 output 3 5 panels wide
i not sure how to tell lor how to understand that row 3 has more pixels and how the set up should look. do the panels do anything to help determine location.
any help would be appreciated.