pixel archway 20 ft

M

Mmlabs

New member
this is a 20foot wide archway made with 3 1.5 inch pvc. bolted at the couplers for easy disassembly at the end of the year .200 5v ws811 bullets ran with an arduino on fast led demo reels .posted in the event someone is looking for an arch solutionScreenshot_20221205-061235_Gallery.jpg
 
Last edited:
drilled a hole in the top of the wood about 6 inches deep and drove a couple of short rebar sticks in 2 at the same time in each post forgot to mention i heated and slightly bent the first and last stick to make it easier and not as much stress on the couplers which will shatter
 
You must log in or register to reply here.
Back
Top