Problem with Vixen 2.1

[Amigorick]

I just connected everything up tonight and the first time I tried the channel tester everything worked great. I turned on every channel individually
and they all worked. Now after about an hour, I tried to turn on a few and it will not work for each individual channel. I can do select all and everything
comes on and will turn off when i select deselect all. I use Xbees all of my controllers. They work as they will turn on the lights. My settings are correct
on the ports for my two transmitters too. What am I missing !! Running the same computer I used last year with Windows 7.
Any suggestions would be greatly appreciated !!

 

[Amigorick]

Figured out last night that first, outside and up at the top inside my transmitter pole, one of the small jumper wires from the USB to TTL adapter and the Xbee Adapter had broken.
After just replacing the wire, it still would not work so I had to replace the TTL dongle too. It works fine now!! Thanks for you help!!