Typical Resistance Reading on Custom Extension Cords

[swampgator352]

I am using 16/3 outdoor extension cord and splicing xconnect pigtails (using solder shrink tubes) on the ends to create some custom length cable extensions for my pixel light show. I want to ensure that I've got a good connection at the solder shrink tubes. What might a typical resistance reading be between the two ends of the cable? Say for a 15 ft and a 25 ft extension.

 

[mcconnellhaus]

I am using 16/3 outdoor extension cord and splicing xconnect pigtails (using solder shrink tubes) on the ends to create some custom length cable extensions for my pixel light show. I want to ensure that I've got a good connection at the solder shrink tubes. What might a typical resistance reading be between the two ends of the cable? Say for a 15 ft and a 25 ft extension.

I don't remember exactly but Ni family lights did a YouTube on it. It was by far the best out of the typical wire choices especially the out of the box ray wu wire extension.

Sent from my VOG-L04 using Tapatalk