Wanted ESPixelstick V3

critic2

critic2

Supporting Member
Looking for 4 of these for a project.
Will trade for a kulp F8-PB+ controller if interested.

1E8FEAAA-37D7-4947-8DAF-A2A1687C405F.jpeg
 
Last edited:
I don't have the V3, but V2 ESPIXELSTICKS with ESP8266's if interested.
I have 2 that were recently removed and replaced with a PB16.
I also have 4 others that I had for spares, but only 3 ESP's for those.
I have several blank ESPIXEL POPS boards as well.
As you can tell I shied away from Wireless, my yard is small enough I can do with 2 X PB16 and some receivers.
I think I also have the USB programmer for the ESP's as well.
 
Last edited:
I was thinking the V3 for a drop in controller for a few of those TIR flood lights I bought a decade ago. The version 3 ESPIXELSTICK can support up to 24v and has the RS485 out for DMX, and of course the SD card support.
If there is something out there that is similar, I am open to suggestions.
 
Last edited:
ahhhh gotcha.
It's amazing the stuff we hang onto.....I still have several of Rob's 10W floods I have never assembled.
:)
 
critic2 said:
I was thinking the V3 for a drop in controller for a few of those TIR flood lights I bought a decade ago. The version 3 ESPIXELSTICK can support up to 24v and has the RS485 out for DMX, and of course the SD card support.
If there is something out there that is similar, I am open to suggestions.
Click to expand...
Quinled Dig Uno
 
You must log in or register to reply here.
Back
Top