Starsman20
Member
I didn't seem to have these issues when I borrowed a pickit 2. Now if I jut try to compile the down loaded file for the PX1 I get these errors
Clean: Done.
Executing: "C:\Program Files (x86)\Microchip\MPASM Suite\MPASMWIN.exe" /q /p16F1825 "C:\Users\tony\Documents\renard-px1a_20130629 (1).asm" /l"renard-px1a_20130629 (1).lst" /e"renard-px1a_20130629 (1).err" /o"renard-px1a_20130629 (1).o"
Message[303] C:\USERS\TONY\DOCUMENTS\RENARD-PX1A_20130629 (1).ASM 341 : Program word too large. Truncated to core size. (DFA4)
Message[303] C:\USERS\TONY\DOCUMENTS\RENARD-PX1A_20130629 (1).ASM 347 : Program word too large. Truncated to core size. (D9FF)
Warning[219] C:\USERS\TONY\DOCUMENTS\RENARD-PX1A_20130629 (1).ASM 741 : Invalid RAM location specified.
Warning[219] C:\USERS\TONY\DOCUMENTS\RENARD-PX1A_20130629 (1).ASM 783 : Invalid RAM location specified.
Warning[219] C:\USERS\TONY\DOCUMENTS\RENARD-PX1A_20130629 (1).ASM 895 : Invalid RAM location specified.
Message[305] C:\USERS\TONY\DOCUMENTS\RENARD-PX1A_20130629 (1).ASM 1005 : Using default destination of 1 (file).
Warning[219] C:\USERS\TONY\DOCUMENTS\RENARD-PX1A_20130629 (1).ASM 1423 : Invalid RAM location specified.
Warning[219] C:\USERS\TONY\DOCUMENTS\RENARD-PX1A_20130629 (1).ASM 3875 : Invalid RAM location specified.
Warning[202] C:\USERS\TONY\DOCUMENTS\RENARD-PX1A_20130629 (1).ASM 4551 : Argument out of range. Least significant bits used.
Message[303] C:\USERS\TONY\DOCUMENTS\RENARD-PX1A_20130629 (1).ASM 4767 : Program word too large. Truncated to core size. (DFA4)
Message[303] C:\USERS\TONY\DOCUMENTS\RENARD-PX1A_20130629 (1).ASM 4767 : Program word too large. Truncated to core size. (D9FF)
Executing: "C:\Program Files (x86)\Microchip\MPASM Suite\mplink.exe" /p16F1825 "renard-px1a_20130629 (1).o" /z__MPLAB_BUILD=1 /o"PX1-a.cof" /M"PX1-a.map" /W
MPLINK 4.49, Linker
Device Database Version 1.14
Copyright (c) 1998-2011 Microchip Technology Inc.
Errors : 0
MP2HEX 4.49, COFF to HEX File Converter
Copyright (c) 1998-2011 Microchip Technology Inc.
Errors : 0
Loaded C:\Users\tony\Documents\PX1 firmware\PX1-a.cof.
----------------------------------------------------------------------
Release build of project `C:\Users\tony\Documents\PX1 firmware\PX1-a.mcp' succeeded.
Language tool versions: MPASMWIN.exe v5.51, mplink.exe v4.49, mplib.exe v4.49
Sun Aug 25 09:14:41 2019
----------------------------------------------------------------------
BUILD SUCCEEDED
and when I try to program it I get this error
Target Detected
Target Device ID (00000000) does not match expected Device
ID (00002760).
I have tried every suggestion I could find on the forum. I have used at least 3 programs and the consistent thing is either the ID number isn't as expected or
Connecting to MPLAB PICkit 3...
Currently loaded firmware on PICkit 3
Firmware Suite Version.....01.56.00
Firmware type..............Enhanced Midrange
Target voltage detected
Target Device ID (0x0) is an Invalid Device ID. Please check your connections to the Target Device.
Device Erased...
Programming...
The following memory area(s) will be programmed:
program memory: start address = 0x0, end address = 0x53f
configuration memory
EEData memory
program memory
Address: 1 Expected Value: 280a Received Value: 0
Failed to program device
I have read a ton on the pickit 3 and little has been good. I do not have access anymore to the 2. The crazy thing is it worked once. I programmed them (4 of them) to have 50 pixels as a test and it worked. Now I need 184 and that is the only thing i have changed in the code. ahhhhhhh.
What am I doing wrong? Thanks.
Clean: Done.
Executing: "C:\Program Files (x86)\Microchip\MPASM Suite\MPASMWIN.exe" /q /p16F1825 "C:\Users\tony\Documents\renard-px1a_20130629 (1).asm" /l"renard-px1a_20130629 (1).lst" /e"renard-px1a_20130629 (1).err" /o"renard-px1a_20130629 (1).o"
Message[303] C:\USERS\TONY\DOCUMENTS\RENARD-PX1A_20130629 (1).ASM 341 : Program word too large. Truncated to core size. (DFA4)
Message[303] C:\USERS\TONY\DOCUMENTS\RENARD-PX1A_20130629 (1).ASM 347 : Program word too large. Truncated to core size. (D9FF)
Warning[219] C:\USERS\TONY\DOCUMENTS\RENARD-PX1A_20130629 (1).ASM 741 : Invalid RAM location specified.
Warning[219] C:\USERS\TONY\DOCUMENTS\RENARD-PX1A_20130629 (1).ASM 783 : Invalid RAM location specified.
Warning[219] C:\USERS\TONY\DOCUMENTS\RENARD-PX1A_20130629 (1).ASM 895 : Invalid RAM location specified.
Message[305] C:\USERS\TONY\DOCUMENTS\RENARD-PX1A_20130629 (1).ASM 1005 : Using default destination of 1 (file).
Warning[219] C:\USERS\TONY\DOCUMENTS\RENARD-PX1A_20130629 (1).ASM 1423 : Invalid RAM location specified.
Warning[219] C:\USERS\TONY\DOCUMENTS\RENARD-PX1A_20130629 (1).ASM 3875 : Invalid RAM location specified.
Warning[202] C:\USERS\TONY\DOCUMENTS\RENARD-PX1A_20130629 (1).ASM 4551 : Argument out of range. Least significant bits used.
Message[303] C:\USERS\TONY\DOCUMENTS\RENARD-PX1A_20130629 (1).ASM 4767 : Program word too large. Truncated to core size. (DFA4)
Message[303] C:\USERS\TONY\DOCUMENTS\RENARD-PX1A_20130629 (1).ASM 4767 : Program word too large. Truncated to core size. (D9FF)
Executing: "C:\Program Files (x86)\Microchip\MPASM Suite\mplink.exe" /p16F1825 "renard-px1a_20130629 (1).o" /z__MPLAB_BUILD=1 /o"PX1-a.cof" /M"PX1-a.map" /W
MPLINK 4.49, Linker
Device Database Version 1.14
Copyright (c) 1998-2011 Microchip Technology Inc.
Errors : 0
MP2HEX 4.49, COFF to HEX File Converter
Copyright (c) 1998-2011 Microchip Technology Inc.
Errors : 0
Loaded C:\Users\tony\Documents\PX1 firmware\PX1-a.cof.
----------------------------------------------------------------------
Release build of project `C:\Users\tony\Documents\PX1 firmware\PX1-a.mcp' succeeded.
Language tool versions: MPASMWIN.exe v5.51, mplink.exe v4.49, mplib.exe v4.49
Sun Aug 25 09:14:41 2019
----------------------------------------------------------------------
BUILD SUCCEEDED
and when I try to program it I get this error
Target Detected
Target Device ID (00000000) does not match expected Device
ID (00002760).
I have tried every suggestion I could find on the forum. I have used at least 3 programs and the consistent thing is either the ID number isn't as expected or
Connecting to MPLAB PICkit 3...
Currently loaded firmware on PICkit 3
Firmware Suite Version.....01.56.00
Firmware type..............Enhanced Midrange
Target voltage detected
Target Device ID (0x0) is an Invalid Device ID. Please check your connections to the Target Device.
Device Erased...
Programming...
The following memory area(s) will be programmed:
program memory: start address = 0x0, end address = 0x53f
configuration memory
EEData memory
program memory
Address: 1 Expected Value: 280a Received Value: 0
Failed to program device
I have read a ton on the pickit 3 and little has been good. I do not have access anymore to the 2. The crazy thing is it worked once. I programmed them (4 of them) to have 50 pixels as a test and it worked. Now I need 184 and that is the only thing i have changed in the code. ahhhhhhh.
What am I doing wrong? Thanks.