Creating a Sequence-Test

From doityourselfchristmas.com
Jump to navigation Jump to search
The printable version is no longer supported and may have rendering errors. Please update your browser bookmarks and please use the default browser print function instead.

HLS has a built in New Sequence Wizard which will walk you through the steps of creating a sequence. If you are attempting to create a new sequence but want to base it's setup on a previously created HLS sequence, follow the instructions on Using HLS Sequence Images.

Setting up the Sequence File:

Figure 0-1
  • To begin, open HLS and select the FILE menu, then choose Start a NEW Sequence - I'll Walk You Through The Steps (See Figure 0-1).


Figure 0-2
  • HLS will ask if your sequence will use audio (Yes), or no audio (no) (See Figure 0-2).


Figure 0-3
  • HLS will ask for permission to create a folder for your new sequence under your HLS folder (YES) (See Figure 0-3).


Figure 0-4
  • You will then be prompted to provide a name for your new sequence (See Figure 0-4).


Figure 0-5
  • HLS will then alert you that it is ready for your audio. (See Figure 0-5).


Setting up the Audio File:

Figure 0-6
  • A prompt will open asking you to select a WAV or MP3 file (See Figure 0-6).


Figure 0-7
  • Navigate to your music file and select it. In this example Music Box Dancer MP3 will be chosen (see Figure 0-7).


Figure 0-8
  • After your music file has been chosen and processed, Figure 0-8 will appear.


Figure 0-9
  • Click on the "I'm Done - Return" button. You should get a save confirmation message (See Figure 0-9).



HLS User Manual and Reference Guide
Previous Page Current Chapter Next Page
Chapter 1: Getting HLS Chapter 2: Creating a Sequence Time Resolution