E1.31 Vixen Plugin: Difference between revisions

From doityourselfchristmas.com
Jump to navigation Jump to search
(Created page with "=Vixen 2.1 , 2.5= [http://doityourselfchristmas.com/forums/attachment.php?attachmentid=6914&d=1276198120 J1SYS Vixen 2 E1.31 Plugin]<br/> [http://www.j1sys.com/Tutorials/Vixen...")
 
 
(17 intermediate revisions by 3 users not shown)
Line 1: Line 1:
=Vixen 2.1 , 2.5=
=E1.31 Vixen Plugin=
[http://doityourselfchristmas.com/forums/attachment.php?attachmentid=6914&d=1276198120 J1SYS Vixen 2 E1.31 Plugin]<br/>
 
=Intro=
[http://doityourselfchristmas.com/wiki/index.php?title=Streaming-ACN E1.31] is a streaming control protocol that allows multiple universes of channels to be transported over Ethernet connections.  It is commonly used with pixel controllers such as the SanDevices [http://sandevices.com/E681info.html E682], the J1Sys [http://www.j1sys.com/ethcongateway/ ECG Controller Family] and the HolidayCoro  [http://www.holidaycoro.com/category-s/1960.htm AlphaPix] Pixel Controller + DMX Bridge and on E1.31 to DMX/Renard Bridges like the [http://www.diyledexpress.com/index.php?main_page=index&cPath=22 6 Port Bridge] by [http://www.diyledexpress.com DIYLEDEXPRESS] or the [http://shop.martinxmas.com/product.php?id_product=46 4 Port Bridge] by [http://shop.martinxmas.com/ RPM].
 
=Disclaimers=
The standard disclaimers pertaining to the information contained on this wiki page are listed [[Disclaimers | here.]]<br/>
 
=How to use E1.31 with Vixen 2.1 , 2.5=
[[File:Vixen-e131.png| 600px]]<br/>
 
[http://doityourselfchristmas.com/forums/attachment.php?attachmentid=6914&d=1276198120 J1SYS Vixen 2 E1.31 Plugin] Download and install to allow E1.31 use with Vixen 2.1 and 2.5<br/>
[http://www.j1sys.com/Tutorials/Vixen/J1SysE131_Vixen_Install.swf How to install]<br/>
[http://www.j1sys.com/Tutorials/Vixen/J1SysE131_Vixen_Install.swf How to install]<br/>
[http://www.j1sys.com/Tutorials/Vixen/J1SysE131_Vixen_Config101.swf How to configure]<br/>
[http://www.j1sys.com/Tutorials/Vixen/J1SysE131_Vixen_Config101.swf How to configure]<br/>
[http://doityourselfchristmas.com/forums/showthread.php?11731-E1-31-Vixen-Plugin Thread]<br/>
[http://doityourselfchristmas.com/forums/showthread.php?11731-E1-31-Vixen-Plugin Discussion Thread]<br/>
<br/>
[[E1.31_(Streaming-ACN)_Protocol#Example_of_Sequencer_Channel_Mapping_of_E1.31_Output| Example of Channel mapping]]<br>
=Vixen 3=
'''Hint:  To add a Unicast address to the J1SYS E131 Plugin, right click over the destination box and a popup box will appear for the unicast IP address'''<br/>
[http://doityourselfchristmas.com/forums/attachment.php?attachmentid=13057&d=1327592236 J1SYS Vixen 3 E1.31 Plugin]<br/>
'''Hint: Remember that the E682 Pixel controller only can use <u>510</u> channels per universe to control lights, not the full 512 channels in a universe.  Channels 511 and 512 are used for special functions, not channel control.'''<br/>
[http://doityourselfchristmas.com/forums/showthread.php?19303-Vixen-3-0-New-E1-31-Output-Module Thread]<br/>
 
=How to use E1.31 with Vixen 3=
[http://www.vixenlights.com/downloads/vixen-3-downloads/ Vixen 3 Download Site]<br>
[https://youtu.be/Xmz4QRH4y10 Vixen 3.2 / E1.31 Configuration Video] (with AlphaPix controllers) [http://www.holidaycoro.com/E1-31-Artnet-Smart-Pixel-Controllers-s/1960.htm] <br>
[http://doityourselfchristmas.com/forums/attachment.php?attachmentid=13057&d=1327592236 J1SYS Vixen 3 E1.31 Plugin] Download and install to allow E1.31 use with Vixen 3<br>
[https://vimeo.com/36182958 How to Install and configure]<br>
[http://doityourselfchristmas.com/forums/showthread.php?19303-Vixen-3-0-New-E1-31-Output-Module Discussion Thread]<br>
 
=Related Links=
[[Pixel Wiring Colors]] <br>
[[Controllers]] <br>
[[Dumb RGB or Intelligent Pixels??]] <br>
[[Things You Will Need To Get Started With Pixels]] <br>
[[Power Supplies]] <br>
[[Pixel Connectors]]<br>
[[Choosing a Pixel Voltage: 5V vs 12V]]<br>
[[Power Injection]]<br>
[[Waterproofing Pixels]]<br>
[[Null Pixels]]<br>
[[Different Styles of Pixels]]<br>
[[E1.31_(Streaming-ACN)_Protocol#Related_Links|E1.31 Setup and Configuration]]
 
[[Category:Protocols]]
[[Category:DIYC Index]]
[[Category:Pixel]]
[[Category:E1.31]]

Latest revision as of 04:05, 24 October 2015

E1.31 Vixen Plugin

Intro

E1.31 is a streaming control protocol that allows multiple universes of channels to be transported over Ethernet connections. It is commonly used with pixel controllers such as the SanDevices E682, the J1Sys ECG Controller Family and the HolidayCoro AlphaPix Pixel Controller + DMX Bridge and on E1.31 to DMX/Renard Bridges like the 6 Port Bridge by DIYLEDEXPRESS or the 4 Port Bridge by RPM.

Disclaimers

The standard disclaimers pertaining to the information contained on this wiki page are listed here.

How to use E1.31 with Vixen 2.1 , 2.5


J1SYS Vixen 2 E1.31 Plugin Download and install to allow E1.31 use with Vixen 2.1 and 2.5
How to install
How to configure
Discussion Thread
Example of Channel mapping
Hint: To add a Unicast address to the J1SYS E131 Plugin, right click over the destination box and a popup box will appear for the unicast IP address
Hint: Remember that the E682 Pixel controller only can use 510 channels per universe to control lights, not the full 512 channels in a universe. Channels 511 and 512 are used for special functions, not channel control.

How to use E1.31 with Vixen 3

Vixen 3 Download Site
Vixen 3.2 / E1.31 Configuration Video (with AlphaPix controllers) [1]
J1SYS Vixen 3 E1.31 Plugin Download and install to allow E1.31 use with Vixen 3
How to Install and configure
Discussion Thread

Related Links

Pixel Wiring Colors
Controllers
Dumb RGB or Intelligent Pixels??
Things You Will Need To Get Started With Pixels
Power Supplies
Pixel Connectors
Choosing a Pixel Voltage: 5V vs 12V
Power Injection
Waterproofing Pixels
Null Pixels
Different Styles of Pixels
E1.31 Setup and Configuration