Rbl ?

wilmar

wilmar

New member
I know there are some mods out there for the RBLs but has anyone tried to print one of these complete bulb and socket ? Either as a one or 2 piece
I’ve started working on one but if someone has done it already it would save some time if willing to share .



Sent from my iPhone using Tapatalk
 
ukewarrior said:
not the bulb itself. Lots of mounting options out there.
Click to expand...

I was working on an idea I had last night for a RBL as I couldn’t find anything on line so thought I’d ask here before putting too much into it .
Thanks


Sent from my iPhone using Tapatalk
 
So far...
e61d593293bf1ab59097e9b04007f4c6.jpg

09bbdb961af1cd8a5bd43deec9df8bde.jpg

1d0c4616ee65481df39bed6c1f536063.jpg


All together about 15” tall
864e5567a9a5fa65421a7bc54685fe24.jpg



Sent from my iPhone using Tapatalk
 
Started the first test on the base the big bulb will have to wait to start till my white filament comes in . Fingers crossed
e1e7e3a8cd2b94dffba41959351fc734.jpg



Sent from my iPhone using Tapatalk
 
That is exactly what I've been looking for. I am horrible at 3d design, even in tinker cad. I've been all over thingverse looking for something like this. I have the Ender3 and a Geetech A20m. The Ender so far is the best. Maybe in time I will get the geetech printing as good. But out of the box the Ender 3 was ready to go with little adjustment.
 
Wichita said:
That is exactly what I've been looking for. I am horrible at 3d design, even in tinker cad. I've been all over thingverse looking for something like this. I have the Ender3 and a Geetech A20m. The Ender so far is the best. Maybe in time I will get the geetech printing as good. But out of the box the Ender 3 was ready to go with little adjustment.
Click to expand...

Yes, same here, I love all my ender3 pros


Sent from my iPhone using Tapatalk
 
Anyone know the size or name of the waterproof connectors that are used on the cg1500s . For the outgoing sets of wires ?


Sent from my iPhone using Tapatalk
 
Not sure size of the RBL but think I made too big lol
Cap and adjustable pixel holder
6a4fd3e2f7355dae86a955790c20a252.jpg

80f53dd926c318c80279a6299e42b77b.jpg


a0a45b34cc27cf908da00b2c921850fa.jpg


Sent from my iPhone using Tapatalk
 
Last edited:
wilmar said:
Yes is that the size most commonly used for led wire


Sent from my iPhone using Tapatalk
Click to expand...
That's the size of the round cable like DIYledexpress used to sell. I said used to sell because I went to their site and it looks like they pretty much discontinued selling them. Not sure what the deal is there.

Sent from my SM-T710 using Tapatalk
 
pmiller said:
That's the size of the round cable like DIYledexpress used to sell. I said used to sell because I went to their site and it looks like they pretty much discontinued selling them. Not sure what the deal is there.

Sent from my SM-T710 using Tapatalk
Click to expand...

Great thank you


Sent from my iPhone using Tapatalk
 
Keep up the work on this, as I really want to add more and now have a big enough printer to actually handle this.
Few questions:
1) What software are you using to design it in? I work in OpenSCAD for all my stuff...
2) Are you planning on posting the design files and/or the finished .stl?
3) Do you have a drain hole in the tip of the bulb like the originals do?
4) Any plan to "flare" the cap towards the bulb so it has a more authentic C9 look?
 
fillibar said:
Keep up the work on this, as I really want to add more and now have a big enough printer to actually handle this.
Few questions:
1) What software are you using to design it in? I work in OpenSCAD for all my stuff...
2) Are you planning on posting the design files and/or the finished .stl?
3) Do you have a drain hole in the tip of the bulb like the originals do?
4) Any plan to "flare" the cap towards the bulb so it has a more authentic C9 look?
Click to expand...

Driving will get back in a few


Sent from my iPhone using Tapatalk
 
fillibar said:
Keep up the work on this, as I really want to add more and now have a big enough printer to actually handle this.
Few questions:
1) What software are you using to design it in? I work in OpenSCAD for all my stuff...
2) Are you planning on posting the design files and/or the finished .stl?
3) Do you have a drain hole in the tip of the bulb like the originals do?
4) Any plan to "flare" the cap towards the bulb so it has a more authentic C9 look?
Click to expand...

1- fusion360
2- yes I plan to share
3- yes drain holes at tip
4- yes initial plan was to try to print the threaded ends but that is posing a headache and waste of a lot of filament and time so I am looking at a different setup for the screw on set up the bulb part will stay same as of now .


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
Back
Top