DMX LED Flood: Difference between revisions
No edit summary |
No edit summary |
||
Line 26: | Line 26: | ||
<pre> | <pre> | ||
Shutter/Strobe/Dimmer | |||
000 - 001 Blackout | |||
1 002 - 127 Strobe: Slow > Fast | 1 002 - 127 Strobe: Slow > Fast | ||
128 - 255 Intensity: 0% > 100% | 128 - 255 Intensity: 0% > 100% | ||
Red | |||
2 000 - 255 0 > 100% | 2 000 - 255 0 > 100% | ||
Green | |||
3 000 - 255 0 > 100% | 3 000 - 255 0 > 100% | ||
Blue | |||
4 000 - 255 0 > 100% | 4 000 - 255 0 > 100% | ||
White | |||
5 000 - 255 0 > 100% | 5 000 - 255 0 > 100% | ||
</pre> | </pre> |
Revision as of 05:15, 31 December 2007
Concept
The idea for the DMX LED floodlights was concieved after reading a thread on the PlanetChristmas forums about the problems with the MR16 LED bulbs that people are using with the Light-O-Rama or d-Light DC control boards. Having looked at some photos of the MR16s, they appear to be nothing but a few LED's and resistors that are soldered to a board.
Schematic
Schematic is currently in the drawing phase.
Layout
Layout is currently in the drawing phase.
BOM
BOM is currently undecided.
579-PIC16F688-I/P 1
Construction Notes
There are two ways that the LED's can be installed. For use with the DMX controller, the LED's will be installed in sink mode (where the ground connection is turned on / off.) For use with a LOR or a d-Light controller, the LED's will be installed in switching mode (where the + connection is turned on / off.)
DMX Values
DEFAULT VALUE FUNCTION
Shutter/Strobe/Dimmer 000 - 001 Blackout 1 002 - 127 Strobe: Slow > Fast 128 - 255 Intensity: 0% > 100% Red 2 000 - 255 0 > 100% Green 3 000 - 255 0 > 100% Blue 4 000 - 255 0 > 100% White 5 000 - 255 0 > 100%
Revision History
12/29/2007 - Initial Schematic / Layouts started.