Led Strip Flood: Difference between revisions

From doityourselfchristmas.com
Jump to navigation Jump to search
(New page: ==Overview== This project is still in the very early stages of development but here is some information so far... <UL> <LI>A 1" x 18" strip containing two rows of 36 5mm superflux RGB l...)
 
Line 8: Line 8:
<LI>Design would allow to half populate the leds to a single row of 36 leds\
<LI>Design would allow to half populate the leds to a single row of 36 leds\
<LI>The board is being designed to be driven from either a Ren24 LV, a DC SSR, or a RenC + grinch or 595.
<LI>The board is being designed to be driven from either a Ren24 LV, a DC SSR, or a RenC + grinch or 595.
<LI>
<LI>Design allowing to be mountable into a 3/4" aluminum channel or some similar casing

Revision as of 22:13, 18 March 2009

Overview

This project is still in the very early stages of development but here is some information so far...


  • A 1" x 18" strip containing two rows of 36 5mm superflux RGB leds (commonly called Piranha Leds).
  • Design would allow to half populate the leds to a single row of 36 leds\
  • The board is being designed to be driven from either a Ren24 LV, a DC SSR, or a RenC + grinch or 595.
  • Design allowing to be mountable into a 3/4" aluminum channel or some similar casing