ACL 5050 Strip Information and Building Help

From doityourselfchristmas.com
Revision as of 18:10, 29 January 2012 by Fathead45 (talk | contribs) (Created page with '==General Information== This is a wall washer that was created as just that but it has been used for much more than that. ==How to Build== ===Supplies Needed=== *Skillet - La…')
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

General Information

This is a wall washer that was created as just that but it has been used for much more than that.

How to Build

Supplies Needed

  • Skillet - Large enough to sit atleast 1 on it. Not necessary but makes it alot easier to solder.
  • Solder Paste - A must as regular solder has to much flux and will cause issues
  • 12 PLC6-5050 RGB leds
  • Tweezers
  • 8 150 ohm SMD Resistors (for blue and green)
  • 4 360 ohm SMD Resistors (red Led)
  • 1 RJ45 Jack

Mouser [[1]]

Retrieved from "http://www.doityourselfchristmas.com/wiki/index.php?title=ACL_5050_Strip_Information_and_Building_Help&oldid=6242"