Fox Cub Documentation
Fox Cub Documentation
Please see the standard Disclaimers
Boards
FoxCub16
FoxCub16 is a 16 channel Renard compatible controller:
- Schematic: FoxCub16Schematic.pdf
- Bill Of Materials: FoxCub16BOM.pdf
- PCB: FoxCub16PCB.pdf
- Silk Screen: FoxCub16SilkScreen.pdf
FCSquealer
Converts serial output over USB from the computer to the RS485 required for the FoxCub16. FCSquealer is opto isolated.:
- Schematic: FCSquealerSchematic.pdf
- Bill Of Materials: FCSquealerBOM.pdf
- PCB: FCSquealerPCB.pdf
- Silk Screen: FCSquealerSilkScreen.pdf
FCPowerInjector
Supplies 5V power to the system:
- Schematic: FCPowerInjectorSchematic.png
- Bill Of Materials: FCPowerInjectorBOM.pdf
No board required. Construction: Cat 5E, 2 x RJ45, DC Power connector, heat shrink and electrical tape.
FCTerminator
Terminates an RS485 rune:
- Schematic: FCTerminatorSchematic.png
- Bill Of Materials: FCTerminatorBOM.pdf
No board required. Construction, RJ45, Cat 5E, resistor and sugru or silicone.
FCRepeater
4 Channel RS485 repeater, useful for decentralized or very large displays:
- Schematic: FCRepeaterSchematic.pdf
- Bill Of Materials: FCRepeaterBOM.pdf