We have an "always-on" display that has been running fine for over a year. It's fed by FPP. I recently swapped out the F16v3 controller board and replaced it with a e682 (for a good reason) and it's giving me issues.
The board seems to be configured properly-- the display lights up as expected when I use the test functions of the 682. Furthermore, the sequence runs just fine when run directly from the Vixen timeline or even the scheduler.
However, when I export a FSEQ and try to play the sequence from FPP there is something obviously wrong. It seems only the first hundred or so channels are outputting.
Almost like the FSEQ does not have all the data.
I've done this many times before with success... but what step am I missing here?
I?ve tried outputting with and without compression.
I am
Thanks.
The board seems to be configured properly-- the display lights up as expected when I use the test functions of the 682. Furthermore, the sequence runs just fine when run directly from the Vixen timeline or even the scheduler.
However, when I export a FSEQ and try to play the sequence from FPP there is something obviously wrong. It seems only the first hundred or so channels are outputting.
Almost like the FSEQ does not have all the data.
I've done this many times before with success... but what step am I missing here?
I?ve tried outputting with and without compression.
I am
Thanks.