brmeadows@gmail.com
New member
I have come across a D Light 16 output board.
I don't have any documentation on the board and don't know how to check the board.
Board is labeled 2420 AC X 16 U1B
D Light Designs 2006.
The board does not power up unless the bootloader jumper is closed. Is this the normal mode for the board? Should there be a jumper on the bootloader pins in order to program the board?
Anyone with a manual for the board and willing to share? Any advise on this board would be greatly appreciated as the information on the internet is sparse at best.
I did find the D Light HU files but I don't know the jumper positions for this board.
It has the following pinouts
Wi Link
ICSP
option module
Bootloader
and a S1 switch
anyone with knowledge on this board?
I have heard it uses LOR protocol and maybe the same dongle, and maybe DMX.
I don't have any documentation on the board and don't know how to check the board.
Board is labeled 2420 AC X 16 U1B
D Light Designs 2006.
The board does not power up unless the bootloader jumper is closed. Is this the normal mode for the board? Should there be a jumper on the bootloader pins in order to program the board?
Anyone with a manual for the board and willing to share? Any advise on this board would be greatly appreciated as the information on the internet is sparse at best.
I did find the D Light HU files but I don't know the jumper positions for this board.
It has the following pinouts
Wi Link
ICSP
option module
Bootloader
and a S1 switch
anyone with knowledge on this board?
I have heard it uses LOR protocol and maybe the same dongle, and maybe DMX.