Dimming curve question

[Santacarl]

Hey all.....

This might be a 'Joe' question but I throw it out to anyone else also......Rich maybe? If I:

1. Set a dimming curve at 50% (around 127 of 255 in the dimming curve design matrix/spreadsheet) intensity for a type of pixel.

2. Set up master lighting for a specific display group made up of that type of pixel (set up in #1 above.)

3. Set the brightness of that master channel at 25% for a selected passage/time frame.

What will is the result on the pixel? Will the master channel (set to 25%) be calculated on the full intensity (100%) or will it be calculated on the 50% intensity level in the dimming curve? Or is it a hybrid/combination of some sort?

Hope that makes sense.....Thanx

 

[JHinkle]

They are sequential.

First the "lighting channel" is applied. The output of that is then used with the "dimming channel".

Hope that helps.

Joe

 

[Santacarl]

They are sequential.

First the "lighting channel" is applied. The output of that is then used with the "dimming channel".

Hope that helps.

Joe

Thanks Joe.....clears it up completely.....