Hi All,
Built my first ( and second but thats a work in progress) 595, but am having some strange issues. It will not work if i connect pin 14 from the parallel port as shown in schematics, and all channels flash ( at about 1/2 brightness) if i have the fast section in my Vixen sequence. Any Suggestions? Also channel 1 dosnt work.
Thanks :hmm:
Built my first ( and second but thats a work in progress) 595, but am having some strange issues. It will not work if i connect pin 14 from the parallel port as shown in schematics, and all channels flash ( at about 1/2 brightness) if i have the fast section in my Vixen sequence. Any Suggestions? Also channel 1 dosnt work.
Thanks :hmm: