I actually built my controller 2 years ago, and I was not able to put up my displays for a variety of reasons.
I have not been able to get the "set the real time clock" step to complete as I cannot get my PC to associate with the HNS network.
There does not appear to be any error file on the sd card.
Here is what I can see:
1. Computer sees the Xbee pro, and it is set to com 1, and the "on" "off" works, but it does not find the HNS network.
2. The heartbeat LED on the main (only) board shows a steady on off pattern (1 sec on 1 sec off)
3. The Audio plays a ticking metronome sound
4. The only other signal light is the Ai light which shows a steady .5 sec on .5 sec off sequence. No other Leds are lighting.
5. the light on the Xbee connected to the PC is on steady and the indicators in the HNS app show : [ON] [TX]
6. PAN is 1103 (default)
7. The PC is running windows 7.
I pulled the sd card and there was no error file.
I emailed greg, but I was hoping this was a common newbie issue.
I could not find any documentation on what the flashing Ai light means.
I have not been able to get the "set the real time clock" step to complete as I cannot get my PC to associate with the HNS network.
There does not appear to be any error file on the sd card.
Here is what I can see:
1. Computer sees the Xbee pro, and it is set to com 1, and the "on" "off" works, but it does not find the HNS network.
2. The heartbeat LED on the main (only) board shows a steady on off pattern (1 sec on 1 sec off)
3. The Audio plays a ticking metronome sound
4. The only other signal light is the Ai light which shows a steady .5 sec on .5 sec off sequence. No other Leds are lighting.
5. the light on the Xbee connected to the PC is on steady and the indicators in the HNS app show : [ON] [TX]
6. PAN is 1103 (default)
7. The PC is running windows 7.
I pulled the sd card and there was no error file.
I emailed greg, but I was hoping this was a common newbie issue.
I could not find any documentation on what the flashing Ai light means.