Hello All,
I'm going to go crazy as I keep getting info from others on how to run or NOT run led puck lights under my eaves. My run with LED pucks around my garages is approx. 200 ft. total. I have attached pics of my house with approx. measurements in ft. for each section. I didn't show the garage which is about 32 ft. for the large one and on the right the garage is approx. 25 ft.
I've been told I can run everything off 1 QUINLED controller with a 1200 watt power supply and just power inject every 100 LED puck lights or so. I have also been told that won't work (But this is how my neighbor had his installed by a company) and they said I should you 3 - Meanwell 350w power supplies one in each location where I have outdoor power outlets for Christmas lights (2 outlets on left , and middle of 2nd floor eaves, and 1 outlet on far right first floor eave.
I've been told to run EVERYTHING off 1 controller, and others tell me to run 2 controllers, 1 on my main eaves and 1 just for the 2 car garage as I really don't have a way to get an extension cable up from garage to 2nd floor lights. Unless someone has another idea?
Looking at my house pics can SOMEONE give me info that makes sense and tell me which direction to start my run and end it and how I should connect it all together? I would truly appreciate it!
P.S. - I marked the power outlet location with yellow circle. Total of 3 of them.
Thank you!
I'm going to go crazy as I keep getting info from others on how to run or NOT run led puck lights under my eaves. My run with LED pucks around my garages is approx. 200 ft. total. I have attached pics of my house with approx. measurements in ft. for each section. I didn't show the garage which is about 32 ft. for the large one and on the right the garage is approx. 25 ft.
I've been told I can run everything off 1 QUINLED controller with a 1200 watt power supply and just power inject every 100 LED puck lights or so. I have also been told that won't work (But this is how my neighbor had his installed by a company) and they said I should you 3 - Meanwell 350w power supplies one in each location where I have outdoor power outlets for Christmas lights (2 outlets on left , and middle of 2nd floor eaves, and 1 outlet on far right first floor eave.
I've been told to run EVERYTHING off 1 controller, and others tell me to run 2 controllers, 1 on my main eaves and 1 just for the 2 car garage as I really don't have a way to get an extension cable up from garage to 2nd floor lights. Unless someone has another idea?
Looking at my house pics can SOMEONE give me info that makes sense and tell me which direction to start my run and end it and how I should connect it all together? I would truly appreciate it!
P.S. - I marked the power outlet location with yellow circle. Total of 3 of them.
Thank you!
Attachments
Last edited: