dirknerkle
Supporting Member
Working on my 2021 show...
If anybody is wondering whether you can make effective wire frames without using a welder, here's your proof. Materials: 9-gauge wire, JB Weld epoxy glue, Metalcast paint, zip ties, black electrical tape, LED rope light, pirate plugs and DIGWDF FiveStick wireless controllers.
If one is good, 3 are better!!! Here they all are running the same channel group as a test. Each is independently wireless, of course.... All that's left to do is toss a few more coats of the Metalcast paint on them and remember to cut the intensity down to about 40% when I sequence them.
https://vimeo.com/537952772
If anybody is wondering whether you can make effective wire frames without using a welder, here's your proof. Materials: 9-gauge wire, JB Weld epoxy glue, Metalcast paint, zip ties, black electrical tape, LED rope light, pirate plugs and DIGWDF FiveStick wireless controllers.
If one is good, 3 are better!!! Here they all are running the same channel group as a test. Each is independently wireless, of course.... All that's left to do is toss a few more coats of the Metalcast paint on them and remember to cut the intensity down to about 40% when I sequence them.
https://vimeo.com/537952772