So not surprisingly, my show is the biggest it's ever been (that's how it usually goes...), lots of AC. Problem is, my GFCI likes to trip any time I jar the power too much, from 0 to 100%. Which is unfortunate, because in my sequence that's precisely the jarring effect that I'm going for.
My GFCI is still the one that came with the house. Is that something that replacing the GFCI outlet with a new one is likely to fix? Is switching that out any more complicated than just switching out a regular outlet? I switched out all my regular outlets to smart outlets (and learned the hard way that they have mechanical relays, and so sequencing my indoor lights results in a bunch of broken outlets. boy was that a hard lesson...). But I never switched the GFCI's.
My GFCI is still the one that came with the house. Is that something that replacing the GFCI outlet with a new one is likely to fix? Is switching that out any more complicated than just switching out a regular outlet? I switched out all my regular outlets to smart outlets (and learned the hard way that they have mechanical relays, and so sequencing my indoor lights results in a bunch of broken outlets. boy was that a hard lesson...). But I never switched the GFCI's.