Oldschoolgrimmy
New member
Hi everybody! Total noob here, but I’m looking to build my own relay boxes using Arduinos and SSRs and control them with Vixen 3.0. I have purchased the following relays:
http://r.ebay.com/bytZn9
But the issue is that I have is that I have several channels in my display that are likely going to need more than 2 amps. So I’d like to use these guys below for the high-amperage channels:
http://r.ebay.com/SPzRBG
Here’s my question: Will these play well together using the same Arduino program? The 2 amp boards are high-level triggers, and the 8 amp versions can be set to high-level. So will they work together without a problem? I’m pretty handy, but I’m no programmer. I need boards that will all work with the same program, which I’ve copied from someone else. Thanks in advance!
http://r.ebay.com/bytZn9
But the issue is that I have is that I have several channels in my display that are likely going to need more than 2 amps. So I’d like to use these guys below for the high-amperage channels:
http://r.ebay.com/SPzRBG
Here’s my question: Will these play well together using the same Arduino program? The 2 amp boards are high-level triggers, and the 8 amp versions can be set to high-level. So will they work together without a problem? I’m pretty handy, but I’m no programmer. I need boards that will all work with the same program, which I’ve copied from someone else. Thanks in advance!
Last edited: