Carlos Javier
New member
It my first year in this, when I run sequences from Xlights they work correctly, but if I run them rendered from fpp or Xlight Scheduler, the first two strips of the Mega tree show pixel from other strips, and there is an LED strip that does not light up an area in the middle too. I have checked the entire setup and it seems correct. It seems like a rendering issue, since running from Xlight works fine.
I use Esp32 modules with Wled connected by Wifi.
When I run the sequences directly from Xlight all works fine.
Thanks in advance
I use Esp32 modules with Wled connected by Wifi.
When I run the sequences directly from Xlight all works fine.
Thanks in advance