Jerry-Rigs
New member
I'm looking for something cheap and simple for my Android phone or iPad that will allow me to manually control a small number of RGB lights in an e1.31 environment.
Something simple like a color picker with a slider for intensity.
I could work with just a bunch of sliders, 1 per channel.
I do not need scenes, cues, or sequences.
Something like sACNview would work. There used to be sACNview for iOS but it is retired now.
My setup:
Dedicated wireless router.
DIGWDF ESP-RS485/DMX Adapter running ESPixelStick (multicast, serial mode, Universe 1, starting channel 97 for 36 channels) ->
36 channel 12v LED controller board ->
12 x RGB 12v 10w floods.
My intent is to use the floods for artistic lighting in a basement photo/video studio.
I am trying to eliminate the need for a Pi running FPP or a laptop running xLights/xSchedule.
Any suggestions?
Something simple like a color picker with a slider for intensity.
I could work with just a bunch of sliders, 1 per channel.
I do not need scenes, cues, or sequences.
Something like sACNview would work. There used to be sACNview for iOS but it is retired now.
My setup:
Dedicated wireless router.
DIGWDF ESP-RS485/DMX Adapter running ESPixelStick (multicast, serial mode, Universe 1, starting channel 97 for 36 channels) ->
36 channel 12v LED controller board ->
12 x RGB 12v 10w floods.
My intent is to use the floods for artistic lighting in a basement photo/video studio.
I am trying to eliminate the need for a Pi running FPP or a laptop running xLights/xSchedule.
Any suggestions?