Led Strip Flood: Difference between revisions
Jump to navigation
Jump to search
Wvengineer (talk | contribs) (New page: ==Overview== This project is still in the very early stages of development but here is some information so far... <UL> <LI>A 1" x 18" strip containing two rows of 36 5mm superflux RGB l...) |
Wvengineer (talk | contribs) |
||
Line 8: | Line 8: | ||
<LI>Design would allow to half populate the leds to a single row of 36 leds\ | <LI>Design would allow to half populate the leds to a single row of 36 leds\ | ||
<LI>The board is being designed to be driven from either a Ren24 LV, a DC SSR, or a RenC + grinch or 595. | <LI>The board is being designed to be driven from either a Ren24 LV, a DC SSR, or a RenC + grinch or 595. | ||
<LI> | <LI>Design allowing to be mountable into a 3/4" aluminum channel or some similar casing |
Revision as of 22:13, 18 March 2009
Overview
This project is still in the very early stages of development but here is some information so far...
- A 1" x 18" strip containing two rows of 36 5mm superflux RGB leds (commonly called Piranha Leds).
- Design would allow to half populate the leds to a single row of 36 leds\
- The board is being designed to be driven from either a Ren24 LV, a DC SSR, or a RenC + grinch or 595.
- Design allowing to be mountable into a 3/4" aluminum channel or some similar casing