Renard64 Power Supply Calculations: Difference between revisions
Jump to navigation
Jump to search
Phil Short (talk | contribs) (Created page with '=Power Supply Calculations for Renard64= This will be divided into two parts. The first part is the power draw calculation, the second part is the power supply margin calculatio…') |
(No difference)
|
Revision as of 19:16, 2 June 2011
Power Supply Calculations for Renard64
This will be divided into two parts. The first part is the power draw calculation, the second part is the power supply margin calculations for that load.
Power Draw
Item | Calc | Value | Qty | Total |
---|---|---|---|---|
PIC16F688 | 3mA (assumed) | 3mA | 8 | 24ma |
Power LED | 3V/300Ω | 10 mA | 1 | 10mA |
RS485 RX chip | 0.5mA | 1mA | 1 | 1mA |
RS485 TX chip | 0.9mA | 1mA | 1 | 1mA |
RS485 Terminator | 3.6V/120Ω | 30 mA | 1 | 30mA |
Channel LEDs | 3V/650 = 4.6mA | 4.6mA | 64 | 295mA |
SSR Optos | 4V/650 = 6.2mA | 6.2mA | 64 | 394mA |
SSR Power LEDs | 3V/650 = 4.6mA | 4.6mA | 8 | 37mA |
Total | 792mA |
Notes:
1)680Ω Resistors are assumed to be at about -5% (650Ω)
2)PIC16F688 maximum current is not specified, but assumed to be 3mA.