Ren64TW: Difference between revisions
Jump to navigation
Jump to search
| (17 intermediate revisions by the same user not shown) | |||
| Line 19: | Line 19: | ||
==='''Board Availability'''=== | ==='''Board Availability'''=== | ||
:The Ren64TW is currently under development and not available at this time. | :The Ren64TW is currently under development and not available at this time. | ||
:Inquires should be directed to [http://doityourselfchristmas.com/forums/member.php?5150-bolwire bolwire] here on the DIYC forum. | |||
==='''Bill of Materials'''=== | ==='''Bill of Materials'''=== | ||
{| border="1" cellpadding="10" style="text-align: center;" | :The BOM project at Mouser contains all parts needed, except the optional XBee module. | ||
:You can find the Mouser project BOM [http://www.mouser.com/ProjectManager/ProjectDetail.aspx?AccessID=e15d06bb34 here] | |||
:{| border="1" cellpadding="10" style="text-align: center;" | |||
!width="200"| PART NUMBER <br> (Mouser PN#) | !width="200"| PART NUMBER <br> (Mouser PN#) | ||
!width="50"| QTY | !width="50"| QTY | ||
| Line 28: | Line 32: | ||
!width="350"| NOMENCLATURE | !width="350"| NOMENCLATURE | ||
|- | |- | ||
|[http://www.mouser.com/ProductDetail/STMicroelectronics/ | |[http://www.mouser.com/ProductDetail/STMicroelectronics/L4941BV/?qs=%2fha2pyFadui8HofDMA595hxfOqvByDJlo3%2fSGiJUrwU%3d 511-L4941BV] ||1||U1||align="left"|LDO Voltage Regulators 5.0V 1.0A Positive | ||
|- | |- | ||
|[http://www.mouser.com/ProductDetail/Keystone-Electronics/3517/?qs=sGAEpiMZZMsQtlBhqKq43WR5nnQe%252bRAu 534-3517]||2||F1||align="left"|Fuse Clips PC FUSE CLIP 5 MM | |[http://www.mouser.com/ProductDetail/Keystone-Electronics/3517/?qs=sGAEpiMZZMsQtlBhqKq43WR5nnQe%252bRAu 534-3517]||2||F1||align="left"|Fuse Clips PC FUSE CLIP 5 MM | ||
| Line 61: | Line 65: | ||
|- | |- | ||
|[http://www.mouser.com/ProductDetail/Vishay-Semiconductors/1N5226B-TR/?qs=sGAEpiMZZMtQ8nqTKtFS%2fJrR9ou1I1aDeyh7f5DEjAQ%3d 78-1N5226B]||1||D7||align="left"|Diode, Zener 3.3V .5W | |[http://www.mouser.com/ProductDetail/Vishay-Semiconductors/1N5226B-TR/?qs=sGAEpiMZZMtQ8nqTKtFS%2fJrR9ou1I1aDeyh7f5DEjAQ%3d 78-1N5226B]||1||D7||align="left"|Diode, Zener 3.3V .5W | ||
|- | |||
|[http://www.mouser.com/ProductDetail/STMicroelectronics/L4931CZ33-AP/?qs=%2fha2pyFaduiWfFYDmjgYBmsXWyC0Jj0691M2VCQD90BdLgDnM8RPnw%3d%3d 511-L4931CZ33-AP]||1||U14||align="left"|LDO Voltage Regulators 3.3V 0.25A Positive | |||
|- | |- | ||
|[http://www.mouser.com/ProductDetail/TE-Connectivity/1-390261-3/?qs=%2fha2pyFaduhUhFNWB9wRj5EVu368lyc%2f9dceg4XReoukrazAyWfZzQ%3d%3d 571-1-390261-3]||8||U6-13||align="left"|14 Pin IC Socket | |[http://www.mouser.com/ProductDetail/TE-Connectivity/1-390261-3/?qs=%2fha2pyFaduhUhFNWB9wRj5EVu368lyc%2f9dceg4XReoukrazAyWfZzQ%3d%3d 571-1-390261-3]||8||U6-13||align="left"|14 Pin IC Socket | ||
| Line 74: | Line 80: | ||
|[http://www.mouser.com/ProductDetail/ABRACON/ACH-18432MHZ-EK/?qs=%2fha2pyFadui2KFiVIPbgzDTwTmDEgAk42lONyKkT8Iddm1TAcsY4UQ%3d%3d 815-ACH-18.432-EK]||1||U3||align="left"|Oscillator | |[http://www.mouser.com/ProductDetail/ABRACON/ACH-18432MHZ-EK/?qs=%2fha2pyFadui2KFiVIPbgzDTwTmDEgAk42lONyKkT8Iddm1TAcsY4UQ%3d%3d 815-ACH-18.432-EK]||1||U3||align="left"|Oscillator | ||
|- | |- | ||
|[http://www.mouser.com/ProductDetail/ | |[http://www.mouser.com/ProductDetail/Texas-Instruments/SN65176BP/?qs=sGAEpiMZZMtk5jbcouIbSxzpF3ne2X14qxEhyaW%2fP7Q%3d 595-SN65176BP]||2||U4-5||align="left"|595-SN65176BP | ||
|- | |- | ||
|[http://www.mouser.com/ProductDetail/Kingbright/WP710A10IT/?qs=%2fha2pyFaduiSDnyyF%252bbBg2l%2fM8M5vPNwgZYKKnItauzvjm7SsOo03w%3d%3d 604-WP710A10IT]||1||PWR||align="left"|Standard LEDs - Through Hole Red 60mcd 625nm 60 deg Transparent | |[http://www.mouser.com/ProductDetail/Kingbright/WP710A10IT/?qs=%2fha2pyFaduiSDnyyF%252bbBg2l%2fM8M5vPNwgZYKKnItauzvjm7SsOo03w%3d%3d 604-WP710A10IT]||1||PWR||align="left"|Standard LEDs - Through Hole Red 60mcd 625nm 60 deg Transparent | ||
| Line 90: | Line 96: | ||
|[http://www.mouser.com/ProductDetail/Microchip/PIC16F688-I-P/?qs=%2fha2pyFaduhP4KuaKjx0gVl8pdQjyz8sUyStClUCc%252bBjLs4RBOYt%252bw%3d%3d 579-PIC16F688-I/P]||8||U6-13||align="left"|8-bit Microcontrollers - MCU 7KB 256 RAM 12 I/O | |[http://www.mouser.com/ProductDetail/Microchip/PIC16F688-I-P/?qs=%2fha2pyFaduhP4KuaKjx0gVl8pdQjyz8sUyStClUCc%252bBjLs4RBOYt%252bw%3d%3d 579-PIC16F688-I/P]||8||U6-13||align="left"|8-bit Microcontrollers - MCU 7KB 256 RAM 12 I/O | ||
|- | |- | ||
|[http://www.mouser.com/ProductDetail/Molex/22-03-2021/?qs=%2fha2pyFaduig80cpJzBz%252bp1Mk6SatQfMs0Kb8iwIeJm7yngneRYe2Q%3d%3d 538-22-03-2021]||4||JP1-2||align="left"|Header 2P | |[http://www.mouser.com/ProductDetail/Molex/22-03-2021/?qs=%2fha2pyFaduig80cpJzBz%252bp1Mk6SatQfMs0Kb8iwIeJm7yngneRYe2Q%3d%3d 538-22-03-2021]||4||JP1-2, JP4-5||align="left"|Header 2P | ||
|- | |- | ||
|[http://www.mouser.com/ProductDetail/Molex/22-03-2031/?qs=%2fha2pyFaduig80cpJzBz%252bhOPEu%252bruAsfsxXKLuyCzokyZ7WIO0p%252bYQ%3d%3d 538-22-03-2031]||2||JP3 | |[http://www.mouser.com/ProductDetail/Molex/22-03-2031/?qs=%2fha2pyFaduig80cpJzBz%252bhOPEu%252bruAsfsxXKLuyCzokyZ7WIO0p%252bYQ%3d%3d 538-22-03-2031]||2||JP3, JP6||align="left"|Header 3P | ||
|- | |- | ||
|[http://www.mouser.com/ProductDetail/Kobiconn/151-8000-E/?qs=%2fha2pyFadugyYkZRCr5gZc2FzazGxCGWev0mZIlhQkM%3d 151-8000-E]||6||Jumpers||align="left"|2 POS Shunt | |[http://www.mouser.com/ProductDetail/Kobiconn/151-8000-E/?qs=%2fha2pyFadugyYkZRCr5gZc2FzazGxCGWev0mZIlhQkM%3d 151-8000-E]||6||Jumpers||align="left"|2 POS Shunt | ||
| Line 104: | Line 110: | ||
==='''Board Assembly'''=== | ==='''Board Assembly'''=== | ||
==='''Jumper Configuration'''=== | ==='''Jumper Configuration'''=== | ||
:The Ren64TW has a jumper for just about any configuration you would like to use. | |||
:Jumper JP1 & JP2: | |||
::For RS-232 (direct to PC) JP1 ON/JP2 OFF | |||
::For RS-485 (output from renard board or converter/adapater) JP1 OFF/JP2 ON, Try removing JP2 if communication issues occur. | |||
:Jumper JP3: Selects weather the incoming data is from a wired connection or XBee module | |||
:Jumper JP4: Enables XBee transmit | |||
:Jumper JP5: Resistor bypass for XBee incoming data | |||
:Jumper JP6: Selects the standard renard method of passing data to the next controller, or to use bypass (thru) for DMX and Start Address firmware use | |||
==='''Test Port'''=== | ==='''Test Port'''=== | ||
:The test port is a simple way of checking for output, or if a cable is good or bad. Simply connect the cable to one of the SSR ports, and the Test Port. | |||
:+5 and GND should be lit anytime there is power to the board, and a cable is connected to the test port and any of the SSR ports. | |||
:The CH1-4 indicators will only light when that SSR channel should be on. | |||
==='''Using the optional XBee support'''=== | ==='''Using the optional XBee support'''=== | ||
==='''Schematic Diagram'''=== | ==='''Schematic Diagram'''=== | ||
:For SSR Ports Diagram see [[Media:Ren64TW_Diagram_P1.pdf]] | |||
:For Power Supply, Communications, Oscillator & Test Port Diagram see [[Media:Ren64TW_Diagram_P2.pdf]] | |||
=='''Firmware'''== | =='''Firmware'''== | ||
:The Ren64TW uses any version of the Renard firmware that other Renard series boards are able to use. | |||
:The firmware page is [http://www.doityourselfchristmas.com/wiki/index.php?title=Renard_Firmware here.] | |||
=='''Setup for Beginners'''== | =='''Setup for Beginners'''== | ||
=='''Trouble Shooting'''== | =='''Trouble Shooting'''== | ||
Latest revision as of 00:07, 6 November 2014
Ren64TW - in development.
This wiki page is under development, please check back as I will be updating it as time allows.
Introduction
- The Ren64TW is a 64 channel board, using external SSRs. It has an on board power supply, and optional XBee support.
- This board is currently in development by J. Bolding (bolwire). An initial run of 10 pcbs has been ordered for testing and verification.
Disclaimers
The Board
- The board measurement is 5.825"W X 5.500"H, and the provided mounting holes are placed to align with a CG-1500 demarcation enclosure.
Board Availability
- The Ren64TW is currently under development and not available at this time.
- Inquires should be directed to bolwire here on the DIYC forum.
Bill of Materials
- The BOM project at Mouser contains all parts needed, except the optional XBee module.
- You can find the Mouser project BOM here
PART NUMBER
(Mouser PN#)QTY REF NOMENCLATURE 511-L4941BV 1 U1 LDO Voltage Regulators 5.0V 1.0A Positive 534-3517 2 F1 Fuse Clips PC FUSE CLIP 5 MM 534-3527C 1 F1 Vinyl Fuse Cover 504-GMA-1-1/2 1 F1 Cartridge Fuses 250VAC 1.5A Fast Acting 511-1N5817 4 D1-4 Diode Vr/20V Io/1A 291-750-RC 2 R1-2 Resistor - 750ohms 1/4W 5% 291-120-RC 1 R3 Resistor – 120ohms 1/4W 5% 299-1K-RC 2 R4, R7 Resistor – 1K ohms 1/8 W 5% 299-27K-RC 3 R5, R8-9 Resistor – 27k ohms 1/8 W 5% 299-680-RC 2 R6, R10 Resistor – 680 ohms 1/8 W 5% 299-33-RC 1 R11 Resistor – 33 ohms 1/8 W 5% 264-330-RC 1 RN1 Resistor Network 6 pin 330 ohm 1/8 w 2% 838-3FS-412 1 TF1 Power Transformer 12.6VAC CT 6.0VA Single Primary 571-7969492 1 120V N Power Terminal 78-1N5229B 1 D5 Diode, Zener 4.3V .5W 78-1N5239B 1 D6 Diode, Zener 9.1V .5W 78-1N5226B 1 D7 Diode, Zener 3.3V .5W 511-L4931CZ33-AP 1 U14 LDO Voltage Regulators 3.3V 0.25A Positive 571-1-390261-3 8 U6-13 14 Pin IC Socket 571-1-390261-2 2 U4-5 8 Pin IC Socket 571-1-390261-1 1 U2 6 Pin IC Socket 571-5556416-1 19 J1-2, SSR Ports RJ 45 Top Entry 649-10090099-S094VLF 1 JDP1 DB 9 Right Angle 815-ACH-18.432-EK 1 U3 Oscillator 595-SN65176BP 2 U4-5 595-SN65176BP 604-WP710A10IT 1 PWR Standard LEDs - Through Hole Red 60mcd 625nm 60 deg Transparent 604-WP710A10GT 6 +5 GND 1 2 3 4 Standard LEDs - Through Hole Grn 60mcd 568nm 34 deg Transparent 782-H11AA1 1 U2 Transistor Output Optocouplers Bi-Directional Input 140-REA332M1CBK1325P 1 C1 Aluminum Electrolytic Capacitors - Leaded 16V 3300uF 20% 12.5x25mm 140-REA470M1CBK0511P 1 C2 Aluminum Electrolytic Capacitors - Leaded 16V 47uF 20% 5x11 mm 80-C322C104K5R 9 C3-11 Multilayer Ceramic Capacitors MLCC - Leaded 50volts 0.1uF 10% X7R 579-PIC16F688-I/P 8 U6-13 8-bit Microcontrollers - MCU 7KB 256 RAM 12 I/O 538-22-03-2021 4 JP1-2, JP4-5 Header 2P 538-22-03-2031 2 JP3, JP6 Header 3P 151-8000-E 6 Jumpers 2 POS Shunt 532-577102B00 1 U1 Heatsink M22-7131042 2 Xbee Xbee header
Board Assembly
Jumper Configuration
- The Ren64TW has a jumper for just about any configuration you would like to use.
- Jumper JP1 & JP2:
- For RS-232 (direct to PC) JP1 ON/JP2 OFF
- For RS-485 (output from renard board or converter/adapater) JP1 OFF/JP2 ON, Try removing JP2 if communication issues occur.
- Jumper JP3: Selects weather the incoming data is from a wired connection or XBee module
- Jumper JP4: Enables XBee transmit
- Jumper JP5: Resistor bypass for XBee incoming data
- Jumper JP6: Selects the standard renard method of passing data to the next controller, or to use bypass (thru) for DMX and Start Address firmware use
Test Port
- The test port is a simple way of checking for output, or if a cable is good or bad. Simply connect the cable to one of the SSR ports, and the Test Port.
- +5 and GND should be lit anytime there is power to the board, and a cable is connected to the test port and any of the SSR ports.
- The CH1-4 indicators will only light when that SSR channel should be on.
Using the optional XBee support
Schematic Diagram
- For SSR Ports Diagram see Media:Ren64TW_Diagram_P1.pdf
- For Power Supply, Communications, Oscillator & Test Port Diagram see Media:Ren64TW_Diagram_P2.pdf
Firmware
- The Ren64TW uses any version of the Renard firmware that other Renard series boards are able to use.
- The firmware page is here.