4 Channel SSROZ Assembly Instructions

From doityourselfchristmas.com
Revision as of 00:43, 24 June 2007 by Wjohn (talk | contribs) (New page: == Background == I was a late starter to the CC.com website last year and missed out on Sean Bowf's COOP for SSRs and decided that I would go ahead and make some of my own. This SSR desi...)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Background

I was a late starter to the CC.com website last year and missed out on Sean Bowf's COOP for SSRs and decided that I would go ahead and make some of my own. This SSR design is a result of collaboration with Sean in January and February 2007, making sure that this design follows the guidance for SSRs as published on www.simpleIO.com and my calculations and testing.

The SSROZ design is currently in it's 4th iteration.


Version History

The first design, SSROZ, was modelled after Sean's COOP board, 2.5.

SSROZ 2.5a, was the first. This is a single side board, 2.2 x 2.0 inches. A small production batch were made and distributed in Australia.

SSROZ 2.5b, a minor change to fix the mounting hole issue identified on 2.5a, and change the Fuse holder to a JAYCAR part #, with 400 mils pins.

SSROA 2.5c, Main production run, based on 2.5b. JAYCAR vertical fuse holder, 400 mil pins.

SSROZ 2.5d, Main Production run, based on 2.5b. Mouser vertical fuse holder, 315 mil pins.

Retrieved from "http://www.doityourselfchristmas.com/wiki/index.php?title=4_Channel_SSROZ_Assembly_Instructions&oldid=258"