DMX LED Flood: Difference between revisions
(New page: === Concept === The idea for the DMX LED floodlights was concieved after reading a thread on the PlanetChristmas forums about the problems with the MR16 LED bulbs that people are using wit...) |
No edit summary |
||
Line 21: | Line 21: | ||
== Construction Notes == | == Construction Notes == | ||
There are two ways that the LED's can be installed. For use with the DMX controller, the LED's will be installed in sink mode (where the ground connection is turned on / off.) For use with a LOR or a d-Light controller, the LED's will be installed in switching mode (where the + connection is turned on / off.) | There are two ways that the LED's can be installed. For use with the DMX controller, the LED's will be installed in sink mode (where the ground connection is turned on / off.) For use with a LOR or a d-Light controller, the LED's will be installed in switching mode (where the + connection is turned on / off.) | ||
== DMX Values == | |||
DEFAULT VALUE FUNCTION | |||
'''Shutter/Strobe/Dimmer''' | |||
000 001 Blackout | |||
1 002 127 Strobe: Slow > Fast | |||
128 255 Intensity: 0% > 100% | |||
'''Red''' | |||
2 000 255 0 > 100% | |||
'''Green''' | |||
3 000 255 0 > 100% | |||
'''Blue''' | |||
4 000 255 0 > 100% | |||
'''White''' | |||
5 000 255 0 > 100% | |||
== Revision History == | == Revision History == | ||
12/29/2007 - Initial Schematic / Layouts started. | 12/29/2007 - Initial Schematic / Layouts started. |
Revision as of 05:12, 31 December 2007
Concept
The idea for the DMX LED floodlights was concieved after reading a thread on the PlanetChristmas forums about the problems with the MR16 LED bulbs that people are using with the Light-O-Rama or d-Light DC control boards. Having looked at some photos of the MR16s, they appear to be nothing but a few LED's and resistors that are soldered to a board.
Schematic
Schematic is currently in the drawing phase.
Layout
Layout is currently in the drawing phase.
BOM
BOM is currently undecided.
579-PIC16F688-I/P 1
Construction Notes
There are two ways that the LED's can be installed. For use with the DMX controller, the LED's will be installed in sink mode (where the ground connection is turned on / off.) For use with a LOR or a d-Light controller, the LED's will be installed in switching mode (where the + connection is turned on / off.)
DMX Values
DEFAULT VALUE FUNCTION
Shutter/Strobe/Dimmer
000 001 Blackout
1 002 127 Strobe: Slow > Fast
128 255 Intensity: 0% > 100%
Red 2 000 255 0 > 100%
Green 3 000 255 0 > 100%
Blue 4 000 255 0 > 100%
White 5 000 255 0 > 100%
Revision History
12/29/2007 - Initial Schematic / Layouts started.