Using LOR Controllers With Renard

From doityourselfchristmas.com
Revision as of 00:43, 27 June 2014 by Jklingert (talk | contribs) (→‎Links)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Intro

A common request for people who already own Light-O-Rama (LOR) controllers is can they use Renard Base Controllers with their LOR Controllers. The short answer is YES, but the LOR and the Renard controllers all need to be run using DMX communications and not Renard communications.

Disclaimers

The standard disclaimers pertaining to the information contained on this wiki page are listed here.
THIS WIKI PAGE IS NOT COMPLETE YET AND HAS NOT BEEN CHECKED FOR ERRORS.

Using LOR Controllers with DMX

Fasteddy's Presentation
Fasteddy PDF
Light-O-Rama DMX Manual
LOR Manuals
LOR DMX Forum

DMX Cable Wiring

DMX#Connecting_Devices

Dongles

LOR RS485 Dongle Manual
LOR Family of Dongles

Programing Renard Controllers with DMX Firmware

Renard DMX Addressing Issues

Links

DMX for Dummies

DMX from Wikipedia

Why terminate?

DMX-512 Primer (good read)

Ujjal's DMX512 Website

DMX Protocol/Packet information

Tons of Lighting links!

Basics of Stage Lighting

DMX Packet and Timing