RenardESP: Difference between revisions

From doityourselfchristmas.com
Jump to navigation Jump to search
(Created page with "right|Version G2 ==The board to make your RENARD controller run from a wifi connection == <p> The SSRneon is a 4 port AC Solid State Relay (SSR)....")
 
m (Showing the information from the page this was cloned from just confuses the reader.)
 
(7 intermediate revisions by one other user not shown)
Line 1: Line 1:
[[Image:Ssrneon_pcb.jpg|right|Version G2]]
[[Image:Renesp.jpg|right|renesp]]
 
==UNDER CONSTRUCTION ==




Line 5: Line 7:
   
   
<p>
<p>
The SSRneon is a 4 port AC Solid State Relay (SSR). It is derived from the same basic design that has been in general use by the DIY community for many years. Most of the DIY SSRs are derived from Sean Bowf's original 4 port SSR.  The design has evolved over the years, but the core functions and parts are the same. The SSRneon, SSRoz and SSRez are all such designs.  
The RenardESP is a WiFi adapter for Renard Christmas light dimmers.  
<br><br>
<br>
The SSRneon-G2-LED is a variant of the SSRneon-G2.<br>
Based off the ESP8266 chipset, this adapter will turn your Renard dimmer into a full fledged e1.31 sACN device. The firmware includes a web server that allows the end user to adjust the various settings.
(ref: [http://www.doityourselfchristmas.com/wiki/index.php?title=SSRneon SSRneon-G2 wiki entry] )
<br>
</p>
If you need to brush up on e1.31 sACN, you can read the wiki entry here: [http://www.doityourselfchristmas.com/wiki/index.php?title=E1.31_%28Streaming-ACN%29_Protocol e1.31 sACN]
<p>
The current Versions of the SSRneon are '''SSRneon-G2''' and '''SSRneon-G2-LED'''.


<!--
== Safety Features ==
== Safety Features ==


Line 282: Line 283:




 
-->
[[Category:SSRez]]
[[Category:E1.31]]
[[Category:SSR]]
[[Category:Renard]]
[[Category:DIYC Index]]
[[Category:DIYC Index]]

Latest revision as of 17:57, 21 March 2016

renesp
renesp

UNDER CONSTRUCTION

The board to make your RENARD controller run from a wifi connection

The RenardESP is a WiFi adapter for Renard Christmas light dimmers.
Based off the ESP8266 chipset, this adapter will turn your Renard dimmer into a full fledged e1.31 sACN device. The firmware includes a web server that allows the end user to adjust the various settings.
If you need to brush up on e1.31 sACN, you can read the wiki entry here: e1.31 sACN

Retrieved from "http://www.doityourselfchristmas.com/wiki/index.php?title=RenardESP&oldid=12293"