FireGod
New member
I ordered all the parts from the BOM and had PCB express make my boards but I'm having trouble on where the caps go on the PC interface. The BOM lists C1-C4 (1uf) which I assume correspond to C3 on the silkscreen however the BOM (and my order) has only 4 of those and there are 5 on the actual circuit board. I assume C2 is the 2200uf and C4 is the 100uf. So that leaves me wondering about C1 on the board and the 5th C3 on the board?
Thanks for any help
Aaron
You can leave off the C3 indicated in the attached picture. It is just for 5VDC smoothing.
Good luck and let me know if I can help further!!