kostyun
Banned User
Since this topic seems to be popping up more and more these days, I wanted to get a general post about how this would be done, what you can do, etc!
<<note, I do not have LOR, or a LOR board - so this is done purely off reading>>
To control your LOR boards with Vixen:
First Step: Create a custom CAT5 cable, you will need either a XLR to CAT5 or a custom CAT5 depending on what dongle you choose to use.
The DIY Controllers use the USITT reccommended CAT5 spec, so a custom wired cat5 is necessary.
DMX and Cat5 Information Thread:
http://www.doityourselfchristmas.com/forums/showthread.php?t=2770
LOR's Infomation on DMX with the LOR boards:
http://www.lightorama.com/Documents/DMX-DOC.pdf
Converting LOR sequences to Vixen:
Program:
http://www.mediafire.com/?sharekey=67b820b16a86efd2d2db6fb9a8902bda
Information Thread:
http://www.doityourselfchristmas.com/forums/showthread.php?t=4849&highlight=vixen+convert
LOR and D Light Vixen Plug-in:
http://www.doityourselfchristmas.com/forums/showthread.php?t=8149
<more info here later>>
I know others have put information out there, and there is additional information - please add to this thread!
<<note, I do not have LOR, or a LOR board - so this is done purely off reading>>
To control your LOR boards with Vixen:
First Step: Create a custom CAT5 cable, you will need either a XLR to CAT5 or a custom CAT5 depending on what dongle you choose to use.
The DIY Controllers use the USITT reccommended CAT5 spec, so a custom wired cat5 is necessary.
DMX and Cat5 Information Thread:
http://www.doityourselfchristmas.com/forums/showthread.php?t=2770
LOR's Infomation on DMX with the LOR boards:
http://www.lightorama.com/Documents/DMX-DOC.pdf
Converting LOR sequences to Vixen:
Program:
http://www.mediafire.com/?sharekey=67b820b16a86efd2d2db6fb9a8902bda
Information Thread:
http://www.doityourselfchristmas.com/forums/showthread.php?t=4849&highlight=vixen+convert
LOR and D Light Vixen Plug-in:
http://www.doityourselfchristmas.com/forums/showthread.php?t=8149
<more info here later>>
I know others have put information out there, and there is additional information - please add to this thread!
Last edited: