Connecting uSD to D1 Mini - need pin connections

[mrGrumpy]

FYI: The dist using GPIO 0 is available so you do not need to change the card.

I pulled the latest dist (4.0-ci8727482106) to test GPIO 0, but I cannot select 0 for SD Chip Select Pin. Am I thinking this correctly?

 

[MartinMueller2003]

which image did you use?

 

[mrGrumpy]

Not sure what image I'm using. Does the admin page tell you.

 

[mrGrumpy]

Not sure what image I'm using. Does the admin page tell you.

I used the one you pointed to in post #15

 

[MartinMueller2003]

GPIO zero is the default GPIO used by the LoLin SD card. That is why I chose it. And yes, you are using the correct image. THat one is set up to work with an unmodified LoLin SD interface.

 

[mrGrumpy]

Sorry to be a pest, but 0 entry for SD Chip Select doesn't allow me to save. Plus it changes the entry field outline to RED and adds a bang (exclamation point circled in red)

I'm reading this 0 is an invalid entry - 1 to 40 seem to be the only valid entries.

 

[MartinMueller2003]

That is a bug. 0 is a valid number.

 

[MartinMueller2003]

New dist.zip has been created that allows GPIO zero to be selected.

 

[MartinMueller2003]

New dist.zip that allows GPIO zero to be a valid value.