Color Stick: Difference between revisions
m (→Schematic) |
(Add color stick code) |
||
| Line 35: | Line 35: | ||
==Assembly manual== | ==Assembly manual== | ||
[http://www.christmasinshirley.com/wiki/images/f/ff/Color_Stick_assembly_instructions.pdf Assembly manual (PDF)] | [http://www.christmasinshirley.com/wiki/images/f/ff/Color_Stick_assembly_instructions.pdf Assembly manual (PDF)] | ||
==Firmware== | |||
[http://www.doityourselfchristmas.com/forums/attachment.php?attachmentid=7923&d=1288739721 color_stick.hex]==Source code== | |||
[http://www.doityourselfchristmas.com/forums/attachment.php?attachmentid=7924&d=1288739744 color_stick_code.zip] | |||
Revision as of 23:32, 2 November 2010
The color stick is an 8-pixel (24 DMX channels) LED display. Each pixel is made of two RGB 5050-sized LEDs; the LEDs can either be loaded on both sides or all on one side.
BOM
From Mouser:
581-06035A220J|2
81-GCM188R71H104KA7J|9
810-C1608X7R1A334K|2
810-C3225X7R1E106M|1
720-LYQ971H1K136|1
649-67996-402HLF|1
538-70287-1001|1
22-28-1040|1
22-15-2046|1
301-1.0K-RC|4
302-4.75K-RC|1
595-TLC5916IDG4|3
701-SP485RCN-L|1
556-ATMEGA48P-20AU|1
815-ABMM-20B2-T|2
821-TS78L05CT|1
In addition, you need 16 5050-sized RGB LEDs; the ones from the group buy are ideal. Mouser 593-VAOS-5050RGBW1 would also work, but the channel mapping of red and blue would be reversed.
Schematic
PCB
Front-side copper (PDF)
Back-side copper (PDF)
Front-side silkscreen (PDF)
Back-side silkscreen (PDF)
Assembly manual
Firmware
color_stick.hex==Source code== color_stick_code.zip