This is a nice discourse guys, thanks!
Sent from my iPhone using Tapatalk
This is a nice discourse guys, thanks!
That is good to know about the USB, it might be worth trying for such a little cost (I guess I don't know how specialized those USB cables are though). I do have a Falcon Player right outside my house for my matrix. I could potentially run the USB straight to that, or plug it into something else all together.....
Sent from my SM-G955U using Tapatalk
That is interesting. Not sure how it would know how many canes are left. One thing that I would need to do is KISS, because my kids help me fill it, and I can't depend on them to reset some sort of counter each time (they are 7 and 5).Hi, just thinking - an ESP8266 putting up a web page that you could check, sending an email or a push notification telling you what stock is left or how many times the button had been pressed. An easy project to do next year if it would help.
That is interesting. Not sure how it would know how many canes are left. One thing that I would need to do is KISS, because my kids help me fill it, and I can't depend on them to reset some sort of counter each time (they are 7 and 5).
Buuuut, getting notified every x button pushes would be pretty sweet. What all do you think would have to go into getting something like this to work. I play with PICs, Arduino, Pi's, ARMs, etc., But I've done absolutely nothing with the ESP stuff (including reading up on it).
Sent from my SM-G955U using Tapatalk
That is interesting. Not sure how it would know how many canes are left. One thing that I would need to do is KISS, because my kids help me fill it, and I can't depend on them to reset some sort of counter each time (they are 7 and 5).
Buuuut, getting notified every x button pushes would be pretty sweet. What all do you think would have to go into getting something like this to work. I play with PICs, Arduino, Pi's, ARMs, etc., But I've done absolutely nothing with the ESP stuff (including reading up on it).
Sent from my SM-G955U using Tapatalk
I actually had investigated something like this 2 years ago. I simulated a circuit using Reed switches and a magnet being dragged behind that would light a C7 incandescent bulb, off, slowly, faster, solid on, depending on how many canes were left.Would be cool if you could utilize something like this pic but make a larger pixel screen that you can see from house think it uses a proximitysensor
Sent from my iPhone using Tapatalk
I actually had investigated something like this 2 years ago. I simulated a circuit using Reed switches and a magnet being dragged behind that would light a C7 incandescent bulb, off, slowly, faster, solid on, depending on how many canes were left.
I tried it out on the bench and it worked, but I didn't really want to drag a magnet behind the last cane, so I abandoned it. The circuit would be all discretes and have no micros or anything else digital.
Sent from my SM-G955U using Tapatalk
Not that simple if the canes get refilled part way through, we would then have to reset a counter so it knew how many were back in there. Plus it would need to remember after power down.When someone hand reaches for button it registers
Sent from my iPhone using Tapatalk
Didn't think to look for a lot, was doing it from scratch with stuff on hand.Yea I looked at one of those with a magnet aswell on Amazon it’s a kit
Sent from my iPhone using Tapatalk
Not that simple if the canes get refilled part way through, we would then have to reset a counter so it knew how many were back in there. Plus it would need to remember after power down.
As much as I don't want to make things too complicated, the wife kind of wants a camera as she thinks it would be cool to see what is going on.
Sent from my SM-G955U using Tapatalk