20W Flood RGB LED driver board (WS2811)

[i_wannabe]

Where abouts in the Great White are you at ?
Shipping is always a negotiation when making the purchase deal in China.

Thank you. I do understand that it is negotiable just needed to point it out as a starting point for those who are not aware of it.

 

[11Bravo]

I want to convert my DIYC floods to 20 watt pixel floods. is the PCB and parts still available?

 

[RobG]

Yes, on Tindie

 

[11Bravo]

Thank you for the reply. What is the power supply that you would recommend for running 8 of the 20watt floods? And what controller does 24volts ws2811 pixels?

 

[LazerBlue]

Thank you for the reply. What is the power supply that you would recommend for running 8 of the 20watt floods? And what controller does 24volts ws2811 pixels?

Any controller will handle them. You just run ground and data from the controller and power separately. I believe the V3 ESPixel stick is also 5v-24v

Sent from my SM-N981U1 using Tapatalk

 

[11Bravo]

Any controller will handle them. You just run ground and data from the controller and power separately. I believe the V3 ESPixel stick is also 5v-24v

Sent from my SM-N981U1 using Tapatalk

Thank you for jumping in. I believe I got you. I guess I would have to have more than one 24v PS because the floods would be set along a 50 foot span.

I have controllers use 5 volts and 12 volts.

 

[jchuchla]

I believe the V3 ESPixel stick is also 5v-24v

Yes it is. So is the V2

 

[jchuchla]

I guess I would have to have more than one 24v PS because the floods would be set along a 50 foot span.

I use one power supply to control a run that is over 50' long. I think it's a meanwell LRS-350-24.